Centos 6.5部署nginx+php环境部署

1.IP地址:192.168.1.241

下载这次部署需要的更新包，并上传到/usr/local/src目录：[root@binds src]# ll

total 17576

-rw-r–r– 1 root root 730589 Jul 14 13:29 nginx-1.2.8.tar.gz

-rw-r–r– 1 root root 1790055 Jul 29 10:39 pcre-8.32.tar.gz

-rw-r–r– 1 root root 14902187 Jul 28 18:00 php-5.3.22.tar.gz

-rw-r–r– 1 root root 560351 Jul 29 10:41 zlib-1.2.7.tar.gz

安装nginx必须安装pcre-8.32.tar.gz

[root@binds pcre-8.32]# tar zxvf pcre-8.32.tar.gz

[root@binds pcre-8.32]# cd pcre-8.32

[root@binds pcre-8.32]# ./configure

[root@binds pcre-8.32]# make && make install

make[3]: Leaving directory `/usr/local/src/pcre-8.32′

make[2]: Leaving directory `/usr/local/src/pcre-8.32′

make[1]: Leaving directory `/usr/local/src/pcre-8.32′

安装结束

接下来安装

[root@binds src]# tar zxvf zlib-1.2.7.tar.gz

[root@binds src]# cd zlib-1.2.7

[root@binds zlib-1.2.7]# ./configure

出现错误Looking for a four-byte integer type… Found. 无关紧要

[root@localhost zlib-1.2.7]# make && make install

chmod 644 /usr/local/lib/libz.a

cp libz.so.1.2.7 /usr/local/lib

chmod 755 /usr/local/lib/libz.so.1.2.7

cp zlib.3 /usr/local/share/man/man3

chmod 644 /usr/local/share/man/man3/zlib.3

cp zlib.pc /usr/local/lib/pkgconfig

chmod 644 /usr/local/lib/pkgconfig/zlib.pc

cp zlib.h zconf.h /usr/local/include

chmod 644 /usr/local/include/zlib.h /usr/local/include/zconf.h

安装结束

安装完成后，安装nginx

[root@binds src]# tar zxvf nginx-1.2.8.tar.gz

[root@binds src]# cd nginx-1.2.8

./configure –prefix=/usr/local/nginx-1.2.8 –with-http_sub_module –with-http_stub_status_module –with-http_ssl_module –with-http_gzip_static_module

Configuration summary

+ using system PCRE library

+ using system OpenSSL library

+ md5: using OpenSSL library

+ sha1: using OpenSSL library

+ using system zlib library

nginx path prefix: “/usr/local/nginx-1.2.8”

nginx binary file: “/usr/local/nginx-1.2.8/sbin/nginx”

nginx configuration prefix: “/usr/local/nginx-1.2.8/conf”

nginx configuration file: “/usr/local/nginx-1.2.8/conf/nginx.conf”

nginx pid file: “/usr/local/nginx-1.2.8/logs/nginx.pid”

nginx error log file: “/usr/local/nginx-1.2.8/logs/error.log”

nginx http access log file: “/usr/local/nginx-1.2.8/logs/access.log”

nginx http client request body temporary files: “client_body_temp”

nginx http proxy temporary files: “proxy_temp”

nginx http fastcgi temporary files: “fastcgi_temp”

nginx http uwsgi temporary files: “uwsgi_temp”

nginx http scgi temporary files: “scgi_temp”

[root@binds nginx-1.2.8]# make && make install

cp conf/nginx.conf ‘/usr/local/nginx-1.2.8/conf/nginx.conf.default’

test -d ‘/usr/local/nginx-1.2.8/logs’ || mkdir -p ‘/usr/local/nginx-1.2.8/logs’

test -d ‘/usr/local/nginx-1.2.8/logs’ || mkdir -p ‘/usr/local/nginx-1.2.8/logs’

test -d ‘/usr/local/nginx-1.2.8/html’ || cp -R html ‘/usr/local/nginx-1.2.8’

test -d ‘/usr/local/nginx-1.2.8/logs’ || mkdir -p ‘/usr/local/nginx-1.2.8/logs’

make[1]: Leaving directory `/usr/local/src/nginx-1.2.8′

安装完成

打补丁：后面会补全的

root@binds nginx-1.2.8]# service iptables stop

iptables: Setting chains to policy ACCEPT: filter [ OK ]

iptables: Flushing firewall rules: [ OK ]

iptables: Unloading modules: [ OK ]

[root@binds nginx-1.2.8]#

[root@localhost nginx-1.2.8]# /usr/local/nginx-1.2.8/sbin/nginx

/usr/local/nginx-1.2.8/sbin/nginx: error while loading shared libraries: libpcre.so.1: cannot open shared object file: No such file or directory

报错解决方法：

创建软连接：[root@binds share]#测试下：ln -s /usr/local/lib/libpcre.so.1 /lib64/

接下来继续安装php

mkdir -p /usr/local/php/lib/php/extensions/no-debug-non-zts-20090626

[root@binds share]# cd /usr/local/src/

[root@binds src]# ll

total 17592

drwxr-xr-x 9 1001 1001 4096 Aug 10 10:58 nginx-1.2.8

-rw-r–r– 1 root root 730589 Jul 14 13:29 nginx-1.2.8.tar.gz

drwxr-xr-x 9 1169 1169 12288 Aug 10 10:34 pcre-8.32

-rw-r–r– 1 root root 1790055 Jul 29 10:39 pcre-8.32.tar.gz

-rw-r–r– 1 root root 14902187 Jul 28 18:00 php-5.3.22.tar.gz

drwxr-xr-x 14 501 games 4096 Aug 10 10:52 zlib-1.2.7

-rw-r–r– 1 root root 560351 Jul 29 10:41 zlib-1.2.7.tar.gz

[root@binds src]# tar zxvf php-5.3.22.tar.gz

[root@binds php-5.3.22]# yum -y install libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers gd curl curl-devel mysql mysql-devel mhash libiconv mcrypt

./configure “–prefix=/usr/local/php” “–enable-fpm” “–with-config-file-path=/home/server_config/php” “–with-mysql=/usr/local/mysql” “–with-mysqli=/usr/local/mysql/bin/mysql_config” “–with-pdo-mysql=/usr/local/mysql” “–with-iconv-dir” “–with-freetype-dir” “–with-jpeg-dir” “–with-png-dir” “–with-gd” “–with-zlib” “–with-libxml-dir” “–with-curl” “–with-curlwrappers” “–with-openssl” “–with-mhash” “–with-xmlrpc” “–with-mcrypt” “–with-ldap” “–with-ldap-sasl” “–enable-xml” “–enable-safe-mode” “–enable-bcmath” “–enable-shmop” “–enable-sysvsem” “–enable-inline-optimization” “–enable-mbregex” “–enable-mbstring” “–enable-gd-native-ttf” “–enable-ftp” “–enable-pcntl” “–enable-sockets” “–enable-fastcgi”

低版本：./configure –prefix=/usr/local/php \
–with-config-file-path=/home/server_config/php\
–with-mysql=/usr/local/mysql/ \
–with-mysqli=/usr/local/mysql/bin/mysql_config –with-iconv-dir=/usr/local/ \
–with-freetype-dir –with-jpeg-dir –with-png-dir –with-zlib –with-libxml-dir=/usr/ \
–enable-xml –disable-rpath –enable-discard-path –enable-bcmath \
–enable-shmop –enable-sysvsem –enable-inline-optimization –with-curl –with-curlwrappers \
–enable-mbregex –enable-fastcgi –enable-fpm –enable-force-cgi-redirect –enable-mbstring \
–with-mcrypt –with-gd –enable-gd-native-ttf –with-openssl –with-mhash –enable-pcntl \
–enable-sockets –with-ldap –with-ldap-sasl –with-xmlrpc –enable-zip –enable-soap
–enable-safe-mode

可能报错：

checking for LDAP Cyrus SASL support… yes

configure: error: Cannot find ldap libraries in /usr/lib.

执行：cp -frp /usr/lib64/libldap* /usr/lib

checking for mcrypt support… yes

configure: error: mcrypt.h not found. Please reinstall libmcrypt.

上传libmcrypt-2.5.8.tar.gz

# tar zxvf libmcrypt-2.5.8.tar.gz
# cd libmcrypt-2.5.8
# ./configure
# make
# make install

checking for specified location of the MySQL UNIX socket… no configure: error: Cannot find libmysq

执行：

cp -rp /usr/lib64/mysql/libmysqlclient.so.16.0.0 /usr/lib/libmysqlclient.so

[root@localhost php-5.3.22]# make && make install

/usr/bin/ld: cannot find -lltdl
collect2: ld returned 1 exit status
make: *** [libphp5.la] Error 1

如果需要mcrypt，那么需要安装libltdl

libltdl在libmcrypt软件包中就有，具体过程：

#cd /software/libmcrypt-2.5.8/libltdl

#./configure –enable-ltdl-install

#make

#make install

[root@localhost php-5.3.22]# cp php.

php.gif php.ini-development php.ini-production

[root@localhost php-5.3.22]# cp php.ini-development /usr/local/php-5.3.22/lib/

[root@localhost php-5.3.22]# cp php.ini-production /usr/local/php-5.3.22/lib/

[root@localhost php-5.3.22]# cd /usr/local/php-5.3.22/

[root@localhost php-5.3.22]# ll

total 32

drwxr-xr-x 2 root root 4096 Aug 11 18:16 bin

drwxr-xr-x 2 root root 4096 Aug 11 18:16 etc

drwxr-xr-x 3 root root 4096 Aug 11 18:16 include

drwxr-xr-x 3 root root 4096 Aug 11 18:18 lib

drwxr-xr-x 4 root root 4096 Aug 11 18:15 man

drwxr-xr-x 2 root root 4096 Aug 11 18:15 sbin

drwxr-xr-x 3 root root 4096 Aug 11 18:15 share

drwxr-xr-x 4 root root 4096 Aug 11 18:15 var

[root@localhost php-5.3.22]# cd etc/

[root@localhost etc]# ll

total 28

-rw-r–r– 1 root root 1222 Aug 11 18:16 pear.conf

-rw-r–r– 1 root root 21680 Aug 11 18:15 php-fpm.conf.default

[root@localhost etc]# mv php-fpm.conf.default php-fpm.conf

[root@localhost etc]# /usr/local/php-5.3.22/sbin/php-fpm

第三方php apc apcu的安装

上传APC-3.1.9.tgz apcu-4.0.6.tgz到服务器

tar zxvf APC-3.1.9.tgz

[root@localhost APC-3.1.9]# /usr/local/php/bin/phpize

[root@localhost src]# tar zxvf apcu-4.0.6.tgz

[root@localhost apcu-4.0.6]# /usr/local/php/bin/phpize

./configure –enable-apcu –with-php-config=/usr/local/php/bin/php-config

./configure –prefix=/usr/local/unixODBC-2.3.0 –includedir=/usr/local/include –libdir=/usr/lib -bindir=/usr/bin –sysconfdir=/etc

安装imagick-3.1.0RC2 先yum -y install ImageMagick-devel

创建登陆账号：